SIKA - Flooring
Explore our Concrete Solutions
Flooring
Flooring is the most important feature in any building to make it beautiful, practical and add a sense of personality. The floor is the finishing touch and the material most touched by the regular user of any building, structure or home. Any building you set foot into, you come in contact with the floor. Beneath your feet, there is an entire system of layers and parts which go together to create this finished look.
Sikafloor®-290 IN
Sikagard®-63 is a solvent free, two part, total solid,
coloured epoxy resin based high build thixotropic protective coating with high chemical resistance. It can be
used on many types of structures or elements such as
cementitious, metallic and epoxy resin binder substrates. The chemical resistant properties provide surface protection from aggressive chemicals that can
cause rapid degradation.
USES
Chemical resistant protective coating on:
▪ Concrete
▪ Stone
▪ Cementitious mortars
▪ Renderings
▪ Epoxy cement
▪ Epoxy resin-based products
▪ Steel
Chemical resistant protective lining for:
▪ Silos
▪ Bund linings
▪ Chemical mixing tanks
▪ Chemical containment tanks
▪ Fuel and oil tanks
▪ Sludge tanks
▪ Industrial chemical areas
▪ Sewage, effluent and waste water treatment
Send Enquiry
Sikafloor®-291
Sikafloor®-291 is a three part, fine textured self smoothing underlay and levelling screed.
Sikafloor®-291 may only be used by experienced professionals. As a self-smoothing screed for: Levelling layer under Epoxy, Polyurethane and PMMA* floor coatings / screeds, tiles, sheet floors,carpets or wooden floors.
Floor topping without particular aesthetic requirements.
Send Enquiry
Sikafloor®-161 HC IN
Sikafloor®-161 HC is a 2-part, low viscosity, multipurpose, epoxy resin which can be used as an epoxy primer, levelling mortar, intermediate layer and mortar screed.
USES
Sikafloor®-161 HC may only be used by experienced
professionals.
For priming concrete substrate, cement screeds and epoxy mortars
▪
▪ For low to medium absorbent substrates
Primer for the Sikafloor®-264 HC and Sikafloor®-264 HC N flooring systems
▪ Binder for levelling mortars and mortar screeds
▪ Intermediate layer underneath Sikafloor®-264 HC N
Send Enquiry
Sikafloor®-264 HC
Sikafloor®-264 HC is a two part, coloured epoxy resin.
USES
Sikafloor®-264 HC may only be used by experienced
professionals. Sikafloor®-264 HC may only be used by experienced
professionals. Sikafloor®-264 HC is used as: Self-smoothening topping & Roller coat for concrete
and cement screeds with normal up to medium
heavy wear e.g. Production area, storage and assembly halls, maintenance workshops, garages and
loading ramps.
▪ Seal coat for broadcast systems, such as multi-storey and underground car parks, maintenance hangars
and for wet process areas, e.g. beverage and food industry
Send Enquiry
Sika® Chapdur (IN)
Sika® Chapdur (IN) is a one part, preblended, coloured mineral dry shake hardener for concrete comprising of cement, specially selected natural mineral aggregates,
admixtures and pigments. Sika® Chapdur (IN) provides a extremely hard wearing and abrasion resistant topping for monolithic floors. When sprinkled and trowelled into fresh wet concrete floors, it forms a coloured, dense and wear resistant smooth surface.
USES
Sika® Chapdur (IN) may only be used by experienced professionals. Suitable for use in all cases where floors are subjected to severe mechanical wear and there is a need to apply special hard wearing surface coverings, such as: Warehouses
Factories
Shopping malls
Public areas
Restaurants
Museums
Parking lots
Garages and Service stations
Send Enquiry
Sikafloor® CureHard-24 IN
Sikafloor® CureHard-24 is a high solids, one part, clear sodium silicate based liquid to harden and densify fresh or hardened concrete. Sikafloor® CureHard-24 reacts to bind the free cement within the concrete substrate to improve the mechanical performance.
USES
Sikafloor® CureHard-24 may only be used by experienced professionals.
Horizontal old or new concrete surfaces, where a hard surface with light to moderate abrasion resistance is required e.g. warehouses, industrial plants, stores, shopping malls, parking structures, service
stations, hangars etc. Suitable for interior or exterior applications
Dust-proofing of prefabricated concrete elements
Send Enquiry
Sikafloor®-359 N
Sikafloor®-359 N is a two part tough-elastic, coloured, non-yellowing, polyurethane seal coat.
USES
Sikafloor®-359 N may only be used by experienced professionals.Abrasion resistant seal coat with high mechanical resistance for broadcast systems with crack-bridging
properties in industrial flooring Particularly suitable for car park decks, ramps and
warehouses etc.
Send Enquiry
Sikafloor®-80 EpoCem® Primer
Sikafloor®-80 EpoCem® Primer is a 2- part water based epoxy resin primer.
USES
Sikafloor®-80 EpoCem® Primer may only be used by
experienced professionals.
A primer and adhesion promoter on the following substrates: New and old concrete
Cementitious screeds
Sikafloor® EpoCem® levelling layers
As a primer for: Sikafloor®-81 EpoCem® and Sikafloor®-82 EpoCem®
Send Enquiry
Sikafloor®-81 EpoCem®
Sikafloor®-81 EpoCem® is a three part, epoxy modified cementitious, fine textured mortar for selfsmoothing floor screeds in thin layers of 1.5 to 3 mm.
USES
Sikafloor®-81 EpoCem® may only be used by experienced professionals. As a Temporary Moisture Barrier (TMB) (min. 2 mm thick) allowing the application of Epoxy, Polyurethane and PMMA* resin floors requiring dry substrates, over high moisture content substrates, even green concrete, for a lasting solution. As a self-smoothing screed for:
Levelling or patching horizontal concrete surfaces, in new work or repairs, in aggressive chemical environmentsFloor topping on non-ventilated damp substrates
without particular aesthetic requirementsLevelling layer under Epoxy, Polyurethane and PMMA* floor coatings / screeds, tiles, sheet floors,carpets or wooden floors
Repair and maintenance of monolithic and vacuum concrete floors
Extended with quartz sand, as a patching and repair mortar:
Under Epoxy, Polyurethane and PMMA floor coatings / screeds* See Notes on Application / Limitations